Table of Contents
Advertisement
Before
you
start, insert the
probe
Why not try mlcrowavlng wlth the temperature
probe rlght now? Start wlth cold tap water Fill
a mlcrowave-safe mug
2/3
full of water and
make Instant soup
f
1
First. put probe into food. In general. Insert
probe Into centermost part of food (at least one
Inch Into food
)
Insert as horlzontally as posslble
Into meats Insert as dlrected In other foods.
2 Place
iood
with probe into oven.
!
3.
Insert cable end into receptacle on oven
wall until "seated". BE SURE PROBE IS AT-
TACLE (When you press
START, if probe
IS
not attached securely, oven sounds a
3 sec-
ond signal and flashes "Use Probe" on dis-
play panel. The oven w ~ l l not start.)
TACHED SECURELY TO
OVEN RECEP-
Use c l ~ p
on
cable to loop cable when needed.
Looplng the cable not only controls the
length of the cable, rt also helps prevent the
probe from sllpplng out of posltlon
3
Close oven door firmly.
Make sure the
cable
lsn
t
interfering wlth the door seal
1,
Touch TEMP COOK. "Enter Temp" flashes
on the display. Read-out displays:
0 and au-
tomatic Power Level 10 is displayed.
2. Select the temperature you want.
Use 170
(shown on display) for your soup.
3. Select Power Level.
The oven is automat-
ically set at
HIGH unless you change the
Power Level. For your coffee, leave the oven
at HIGH. (For other foods, see recipe's in your
Cookbook for suggested
Power Levels.
To
change from automatic HIGH
(10).
touch de-
sired Power Level
number pad at blsttom of
control panel.
4 .
Press START. The inside light comes on. A
fan starts. The readout automattcally In-
dicates temperature.
5 . The word
"Cool"
on the readout lets you
know that the
internal temperature of the
food hasn't reached 90°F. yet. Since the wa-
ter for your soup came from the cold
water
tap, it'll be less than 90".
The probe senses temperatures between 90''
and 200°F Once above 90".
the readout
panel shows you the mternal temperature of
the food untll the temperature you selected is
reached. The oven sounds for 3 seconds and
flashes "End". Then the oven shuts clff.
6 . The signal tells you when the foocl reaches
the temperature you selected. The o'ien auto-
matically shuts off. Soup's ready!
7. Remove the cable end
of the probe from
the receptacle.
Then remove food and
tem-
perature probe together.
13
Advertisement
Table of Contents
