Standby Display; Memory; Anti-Crease - Miele W 3923 WPS Operating Instructions Manual

Standby display

To save energy, the display goes out
and the indicator light for the Start/
Stop button will start flashing slowly.
The display will always go out,
– if a programme is not selected within
10 minutes of the machine being
switched on.
– 10 minutes after the end of a
programme.
Pressing one of the buttons switches
the display back on again.
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
On
The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.
Not in current programme
(the machine is delivered with this
option selected)
The standby function is switched off.
The display will remain visible during a
programme.

Memory

If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
Downloaded From WashingMachine-Manual.com Manuals
When this programme is chosen again
these settings will appear in the
display.
The machine is delivered with the
memory function deactivated.

Anti-crease

Anti-crease helps prevent creasing if
laundry is not normally removed im-
mediately after the end of a
programme.
The drum will turn at intervals for up to
30 minutes after the programme has
finished. The door can be opened and
laundry removed at any time during the
anti-crease phase.
On
(the machine is delivered with this
option selected)
Anti-crease is activated.
Off
Anti-crease is deactivated.
To close the Settings menu
Settings
Back A
Continue
^ Press the right hand Menu button
under OK.
Settings menu
OK
69