Brother DCP-J562DW Online User's Manual page 458

Home > Troubleshooting
Report > Transfer Faxes to Another Fax Machine
Transfer Faxes to Another Fax Machine
Related Models: MFC-J480DW/MFC-J680DW/MFC-J880DW
If you have not set up your Station ID, you cannot enter fax transfer mode.
>> MFC-J480DW
>> MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Press Stop/Exit to interrupt the error temporarily.
2. Press Settings.
3. Press a or b to select the following:
a. Select [Service]. Press OK.
b. Select [Data Transfer]. Press OK.
c. Select [Fax Transfer]. Press OK.
4. Do one of the following:
• If the LCD displays [No Data], there are no faxes left in the machine's memory.
Press Stop/Exit.
• Enter the fax number where faxes will be forwarded.
5. Press Mono Start.
MFC-J680DW/MFC-J880DW
1. Press to interrupt the error temporarily.
2. Press [Settings] > [All Settings] > [Service] > [Data Transfer] > [Fax Transfer].
3. Do one of the following:
• If the Touchscreen displays [No Data], there are no faxes left in the machine's memory.
Press [Close], and then press
• Enter the fax number where faxes will be forwarded.
4. Press [Fax Start].
Related Information
• Transfer Your Faxes or Fax Journal Report
• Set Your Station ID
> Error and Maintenance Messages
.
> Transfer Your Faxes or Fax Journal
452