Brother DCP-J562DW Online User's Manual page 448

Hide thumbs Also See for DCP-J562DW:
Table of Contents

Advertisement

Error Message
Wrong Ink Colour
DCP-J562DW/MFC-J680DW/MFC-J880DW
Error Message
A device is already
connected. Press
[OK].
(Wi-Fi Direct)
B&W 1-sided Print
Only
Replace ink.
BT Call Sign On
(U.K. only)
(MFC models)
Cannot Detect
Cause
An ink cartridge has been installed in the
wrong position.
Cause
Two mobile devices are already
connected to the Wi-Fi Direct network
when the Brother machine is the Group
Owner (G/O).
One or more of the colour ink cartridges
have reached the end of their lives.
You can use the machine in monochrome
mode for approximately four weeks
depending on the number of pages you
print.
While this message appears on the
Touchscreen, each operation works in the
following way:
Printing
If the media type is set to Plain Paper
in the Basic tab, and Greyscale is
chosen in the Advanced tab of the
printer driver, you can use the machine
as a monochrome printer.
2-sided print is not available when this
message appears.
Copying
If the paper type is set to Plain
Paper, you can make copies in
monochrome.
2-sided copy is not available when this
message appears.
Faxing
If the paper type is set to Plain
Paper or Inkjet Paper, the
machine will receive and print the
faxes in monochrome.
If a sending machine has a colour fax,
the machine's "handshake" will ask
that the fax be sent as monochrome.
BT Call Sign is set to On. You cannot
change the Receive Mode from Manual to
another mode.
You installed a new ink cartridge too
quickly and the machine did not detect it.
An ink cartridge is not installed correctly.
A used ink cartridge was reinstalled.
Action
Check which ink cartridges are not
matched by colour to their ink cartridge
positions and move them to their correct
positions.
Action
After the current connection between your
Brother machine and another mobile
device has shut down, try to configure the
Wi-Fi Direct settings again. You can
confirm the connection status by printing
the Network Configuration Report.
Replace the ink cartridges.
See Related Information: Replace the Ink
Cartridges.
Although the Cause column lists options
for using the machine after this error
appears, you will not be able to use the
machine until you replace the ink
cartridge(s) under the following
conditions:
If you unplug the machine or take out
the ink cartridge.
®
(Windows
) If you select Slow Drying
Paper in the Basic tab of the printer
driver.
(Macintosh) If you select Slow Drying
Paper in the Print Settings drop-
down list of the printer driver.
Set BT Call Sign to Off.
See Related Information: Enable the
Machine to Work with BT Call Sign (with
Your External Telephone only).
Take out the new ink cartridge and
reinstall it slowly and firmly until it latches.
See Related Information: Replace the Ink
Cartridges.
Remove the used ink cartridge and install
a new one.
442

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j480dwMfc-j680dwMfc-j880dw

Table of Contents