Sony HCD-VX3A Service Manual page 12

[VIDEO CD COLOR-BARS MODE]
On this mode, the data of the color-bars signal as a picture signal and the 1kHz sine wave signal as a sound signal are output by the
mechanism control microcomputer (IC502) for video CD signal check. When measurement of the voltage and waveform on the VIDEO
board, perform it in this mode.
For refernce, the color-bars signal can be observed at J302 (VIDEO OUT) and the sound signal can be observed at J101 (VIDEO/MD
(AUDIO) OUT) using an oscilloscope.
1. Connect the lead wire to both ends of the land of SL503 of the VIDEO board.
2. Turn the power on. Press FUNCTION button to select CD.
3. After 2 or 3 seconds later, connect the lead wire.
4. After measuring, remove the lead wire connected.
[VIDEO BOARD] (SIDE A)
D502
SL501
[VIDEO BOARD] (SIDE B)
SL503
TEST
SL502
MODE
SL501
12
Downloaded from www.Manualslib.com
SL502 SL503
TEST MODE
CT503
VIDEO
FREQUENCY
IC502
manuals search engine
IC505
IC507