Alcatel POP3 User Manual page 7

Removing memory card
1. Locate the microSD card slot on the left side of phone, opposite to
SIM card slot.
2. Pull microSD card and remove.
Charging battery
Connect the USB Cable provided to your phone and charger, connect the
charger to an electric outlet. You will be able to confirm the battery is
charging when the phone charging icon is displayed on the status bar.
The charging icon will not display if your battery is completely
consumed. To reduce power consumption and energy waste,
when battery is fully charged disconnect your charger from the
plug; switch off GPS, Bluetooth or background-running
applications when not in use.
Power on your phone
1.2.2
Hold down the Power key until the phone powers on, then unlock your
phone if you set up a screen lock (Swipe, PIN, password, or pattern). The
Home screen is displayed once the phone is unlocked.
If you do not know your PIN code or if you have forgotten it, contact your
network operator. Do not store the PIN code within your phone; be sure
to store the PIN in a location that is secure, but accessible without using
your phone.
Setting up your phone for the first time
The first time you power on the phone, you should set the following options:
• Scroll up or down to select the phone's language, then touch
• Select an available Wi-Fi network, then touch NEXT, otherwise touch
SKIP.
• Login to an existing Google account or create a new account.
Set up the screen lock by touching SET SCREEN LOCK NOW to make
•
your phone more secure, otherwise touch SKIP.
• Set up Google Services by marking the corresponding checkboxes, touch
Learn more to learn more about Google Services, then touch NEXT.
1.2.3 Power off your phone
Hold down the Power key from the Home screen until the Phone options
appear, then select Power off.
3
.