Managing Multiple Calls; Call Settings - Alcatel POP3 User Manual

Touch to display the Dial pad.
Touch to hold the current call. Touch this icon again to retrieve
the call.
Touch to add a call.
To avoid accidental operation of the touchscreen during a call,
the screen will darken automatically when you put the
cellphone close to your ear; and the screen will light up when
the cellphone is taken away from your ear.

Managing multiple calls

3.1.6
With this phone you can handle multiple calls at the same time.
Swap calls
When you accept two calls, touch the
between two lines. The current call will be put on hold and you are able
to join the other call.
Conference calls
You can set up a conference call as follows.
• Place a call to the first participant of the conference call.
• Touch the icon .
• Then touch the icon
conference.
• Touch to end the conference call and disconnect all callers.
3.1.7

Call settings

from the Call screen, then touch Settings. The following options
Touch
are available:
icon, you can now switch
and then touch the icon
Call settings
Voicemail
• Service: Opens a dialog box where you can select your operator's
voicemail service or another service.
Sound: Touch to set the sound when a new voicemail arrives.
•
Vibrate: Mark the checkbox to enable vibration when a new voicemail
•
arrives.
Call barring: Touch to configure Call barring settings. Mark the check
box to activate the call barring for outgoing and incoming calls.
Service Dialing Numbers: You can place a call from the SDN list.
Call forwarding: Touch to configure how your calls are forwarded when
you are busy, unanswered or unreachable.
Additional settings
Caller ID: Touch to use default operator settings to display your number
•
in outgoing calls.
• Call waiting: Mark the check box to notify you of new incoming calls
during a call.
Other call settings
TTY mode: TTY mode can be used by people who are deaf, have poor
hearing or speech impairments.
Hearing aids: Hearing aid mode can be used by people who are deaf,
have poor hearing or speech impairments. After connecting the phone
to start the
and hearing aid device, calls are linked to a relay service, which converts
incoming speech to text for the person using the hearing aid and converts
outgoing text from the hearing aid device to a spoken voice for the person
on the other end of the conversation.
DTMF Tones: Dual Tone Multi-Frequency, or DTMF is a method for
instructing a telephone switching system of the telephone number to be
dialed, or to issue commands to switching systems or related telephony
equipment. Touch to enable DTMF tones.
14