Fiat Punto 2004 Training Manual page 437

Fiat Auto S.p.A.
ELECTRIC
FIAT PUNTO TRAINING OUTLINE
SYSTEM After Sales Training
Light selector: it consists of a ring with 3 stable positions, located at the lever end, which is
actuated by rotation along the lever axis.
Wiping control lever
Windscreen wiper control: the windscreen wiper is controlled by a ring with 3 stable
positions, located at the lever end, which is actuated by rotation along the lever axis. Three
different speeds can be chosen: intermittent/automatic operation, continuous speed 1,
continuous speed 2.
Window washer control: the bi-directional pump for front window washing is actuated by
pulling the lever towards the steering wheel crown. This actuation is unstable; therefore, the
lever shall return to its rest position when it is released, thus opening the contact again.
Rear window wiper control: the rear window wiper is controlled by turning a ring with 2
stable positions, located in the middle of the lever.
Rear window washing control: the bi-directional pump for rear window washing is actuated
by pushing the lever towards the dashboard. This actuation is unstable; therefore, the lever
shall return to its rest position when it is released, thus opening the contact again.
"Trip" function button: by pressing the unstable button located at the lever end, the "Trip"
function will be commanded to the vehicle panel.
436 / 532
gb Fiat Grande Punto OK © 2005 Fiat Auto S.p.A. – All rights reserved.