Table of Contents
Advertisement
5.
Scroll down to the Available Networks Folder section of the screen and adjust the following settings:
•
Share Name. If only one USB device is connected, the default share name is USB_Storage. The
default share name for an eSATA device is External_Disk.
You can click the name or you can type it in the address field of your web browser. If Not Shared
is shown, the default share was deleted and no other share for the root folder exists. Click the link
to change this setting.
•
Read Access and Write Access. Show the permissions and access controls on the network
folder. All–no password (the default) allows all users to access the network folder. The password
for admin is the same one that you use to log in to the router.
•
Folder Name. Full path of the network folder.
•
Volume Name. Volume name from the storage device.
•
Total Space and Free Space. Show the current utilization of the storage device.
Add a Network Folder on a Storage Device
You can add network folders on a storage device connected to the router USB ports and eSATA port.
To add a network folder:
1.
Launch a web browser from a computer or wireless device that is connected to the network.
2.
Type http://www.routerlogin.net.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > ReadySHARE > Advanced Settings.
Share Storage Devices Attached to the Router
75
Advertisement
Table of Contents
