Rewind The Film And Unload Film Cartridge; Setting The Date Or Time - Polaroid 3100Bf User Manual

Setting the Date or Time

1. Press the mode button to select the
format for adding either the date or the
time.
2. Press the "Y/H" button to change the
year (in the date mode format) or the
hour (in the time format).
3. Press the "M" button to change the
month in the date format. (The "M"
button is not used in the time format.)
4. Press the "D/M" button to change the

Rewind the Film and Unload Film Cartridge

Once the end of the film is reached, the
film will not advance any further.
1. Slide the rewind switch (21) until it
clicks into position and the film
automatically rewinds (Fig. 12).
2. After the film is fully rewound, the
motor will stop, and "S" will be seen in
the film counter window. You may
open the back cover and remove the
film cartridge.
3. If you wish to rewind the film before
reaching the end of the roll, slide the
rewind switch.
(con't)
5. To turn off the date or time display,
4. Be careful not to touch the inner lens
5. Send the film for processing as soon
8
day (in the date format) or the minute
(in the time format).
press the mode switch until horizontal
lines appear (— - —). No date or time
will print on your photograph.
Note: The date or time may be
washed out when viewed
against bright or orange
backgrounds.
surface with your fingers or the edge
of the film.
as possible.