Advertisement
You will then need to select the appropriate profile in the control panel. You can do this by
selecting: Properties/Settings/Advanced/Quadro FX xxxx/Performance & Quality Settings. In the
"Active profile" drop-down menu, select "3D App – Modeling AFR".
Finally, you need to turn "Vertical sync" off. While still in the "Performance & Quality Settings"
window, check the "Vertical sync" box under the "Settings for 3D App – Modeling AFR". Then un-
check the box at the bottom of the window that reads "Application-controlled".
Select "Apply" and "OK". You are now ready to run the SPECviewperf benchmarks.
You can download the SPECviewperf benchmarks at:
Comparison Benchmark Results (SLI Frame Rendering for Windows)
Test platform:
HP xw9300 workstation
NVIDIA nForce Professional MCP
Two AMD Opteron 250 processors (2.39 GHz)
1 or 2 NVIDIA Quadro FX 4400 graphics boards
2 GB RAM ECC Registered DRAM
Microsoft Windows XP Professional SP2
NVIDIA graphics driver version 77.13
SPECviewperf 8.1 results
Benchmarks
Two NVIDIA Quadro FX 4400 boards
3dsmax-03
catia-01
ensight-01
light-07
maya-01
proe-03
sw-01
ugs-04
SLI: Two GPUs
36.02
27.97
30.02
21.87
54.19
61.11
34.04
54.59
www.spec.org/benchmarks.html#gpc
Single GPU
One NVIDIA Quadro FX 4400 board
34.38
26.63
21.83
21.78
53.97
54.96
25.33
37.02
Advertisement
