Using The T2 With The Concerto Nuvonet - Nuvo NV-T2DF Installation Manual

IV. Using the T2 with the Concerto NuVoNet
Setting Up the Tuner for NuVoNet
The T2 must be set for one of the Concerto source
inputs 1-6. This can be done at the front panel when
the tuner is first turned on, in the T2 Configurator
software, or through the front panel advanced menu.
The best way to utilize the T2 with NuVoNet is to set
up the T2 options in the included Configurator
software, and then download the configuration
through the rear-panel USB port, using the supplied
USB cable, fig. 20.
Making Sure Your Concerto Is Ready for NuVoNet Use
Your Concerto System must be updated with at least
software version 1.40 for proper NuVoNet
communication with the T2. To check what
Configurator version you currently have, open the
Concerto Configurator software on your computer by
double-clicking on the Configurator icon on the
desktop. You will see a splash screen appear before
the software opens. This lists the current software
version. If you do not have version 1.40 or later, go to
www.nuvotechnologies.com/prozone
log onto the Download page and download the latest
version.
When this is done, open the applicable configuration
from your configuration files or retrieve the
configuration from the Concerto main unit. Once the
appropriate configuration is opened, go to the Source
tab and place the T2 IR library in the appropriate
source locations 1-6. Once you have added the T2 as
two of the Concerto sources, you can then download
the configuration to the Concerto through the USB
port or the RS232 port on the back of the Concerto,
fig, 21. When the download is complete, your system
is ready for NuVoNet Communication.
Making the Connection
Prior to connecting to NuVoNet, the Concerto must
have the correct Configuration version downloaded
with the T2 representing two of the audio sources.
Making the NuVoNet connection is done simply by
connecting the "NuVoNet" output on the T2 to one of
the "Peripheral Device" inputs on the Concerto EZ
Port, fig., 22. This connection will then enable bi-
directional NuVoNet communication with the Display
Pads.
Fig. 20
IR PASS-THRU
IR INPUT
Fig. 21
. There you can
Fig. 22
Page 17
Model NV-T2DF
NuVoNet Dual XM Tuner
NuVo Techonlogies LLC• Cincinnati Ohio USA
IN OUT
www.nuvotechnologies.com
USB RS 232
CM
SYSTEM
3033118
Model NV-T2DF
NuVoNet Dual XM Tuner
IR PASS-THRU NuVo Techonlogies LLC• Cincinnati Ohio USA
IN OUT
www.nuvotechnologies.com
USB RS 232
IR INPUT
CM
SYSTEM
3033118
Network Cable
SYSTEM ON DO NOT DISTURB