Pioneer REKORDBOX Operating Instructions Manual page 89

Calling saved cue or loop points
1 Load the music file containing the cue or loop points you wish to call into the
player panel.
The time of saved cue/loop points in (minute/second/millisecond) are shown in the
MEMORY panel in the sub-panel for the loaded track.
2 Click the cue/loop call button to start playback from the cue/Loop point.
The playback position is moved to the selected point and the play pauses.
Click to jump forward to a saved cue or loop point from the currently playing position.
Click to jump backward to a saved cue or loop point from the currently playing
position.
3 Click [ ].
Playback or loop playback starts.
 To delete the cue or loop point, click [ ] on the right side of the Cue/Loop Call button.
Setting a saved loop as the active loop
When a loop point is saved, a loop icon
Call button.
To set the loop as an active loop, click
When the loop is set as an active loop,
If you click the menu button in the right of enlarged waveform of the player panel and
select [On] in [Active Loop Playback], loop playback automatically starts at the point of
active loop when you play a track on players supporting active loop function. Using
rekordbox, you can check how active loop is performed on CDJs and XDJs.
・For instructions on active loops, see the Operating Instructions of each DJ equipment
is displayed on the left side of Cue/Loop
.
turns to .
88