Lamp; Multi Duct; Main Pwb; Freezer Compartment Lamp - LG LMXS27626S Service Manual

3-6 LAMP

Unplug, or disconnect power at the circuit breaker.
If necessary, remove top shelf or shelves.
3-6-1 Refrigerator Compartment Lamp
1) Release 2 screws.
2) Hold both ends and pull down to remove.
3) To remove the lamp case and cover, release 2 screws
as shown.
4) Use a flat tool as shown below to remove the lamp
cover.
5) To remove the LED assembly, pull apart the cover.
Cover, lamp LED, Assembly

3-6-2 Freezer Compartment Lamp

1. Unplug refrigerator power cord form outlet.
2. Remove screw with driver.
3. Grasp the cover Lamp, pull the cover downward.

3-7 MULTI DUCT

1. Romove the upper and
lower caps with a flat
screwdriver and remove
2 screws.
(Figure 3)
2. Disconnect the lead wire
on the bottom position.

3-8 MAIN PWB

WARNING: Unplug the refrigerator before removing the
control board.
1) Loosen the 3 screws on the PWB cover.
2) Remove the PWB cover
Case, lamp
3) Disconnect wire harness and replace the main PWB in
the reverse order of removal.
- -
Figure 3