DGS-3710 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide
Rear Panel Description
The rear panel of the Switch has no input, output, or display components.
Figure 1–3 Rear panel view of a DGS-3710-12C Switch
Side Panel Description
The system heat vents located on each side dissipate heat. Do not block these openings. Leave at least 6 inches of
space at the rear and sides of the Switch for proper ventilation. Be reminded that without proper heat dissipation and
air circulation, system components might overheat, which could lead to system failure or even severely damage
components.
Figure 1–4 Side panels of a DGS-3710-12C Switch
13