Plug & Play Feature - Samsung 4 SERIES User Manual

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
N
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
N
1. Press the POWER button on the remote control. Menu Language menu is displayed.
. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER E
button. The message Select 'Home Use' when installing this TV in your home. is
displayed.
. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER E
button.
We recommend setting the TV to Home Use mode for the best picture in your home
N
environment.
Store Demo mode is only intended for use in retail environments.
N
If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on
N
the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. The message Check antenna input. is displayed with OK selected. Press the ENTER E button. Area menu is displayed.
5. Select your country or area by pressing the ▲ or ▼ button, then press the ENTER E button. Auto Store menu is displayed.
. Press the ENTER E button to start search the channels. The channel search will start automatically. After all the available
channels are stored, Clock Set menu is automatically displayed.
To stop the search before it has finished, press the ENTER E button with Stop selected.
N
. Press the ◄ or ► button to select Month, Day, Year, Hour, Minute, or am/pm. Set these by pressing the ▲ or ▼ button.
You can set the Month, Day, Year, Hour, and Minute directly by pressing the numeric buttons on the remote control.
N
. Press the ENTER E button to confirm your setting.
The message Enjoy your TV. is displayed.
When you have finished, press the ENTER E button.
If you want to reset this feature...
1. Press the MENU button to display the menu.
. Press the ▲ or ▼ button to select Setup, then press the ENTER E button.
. Press the ENTER E button again to select Plug & Play.
The message Start Plug & Play. is displayed.
Downloaded From TV-Manual.com Manuals
English - 10
Plug & Play
English
Menu Language
ไทย
中文
Enter Enter
Move
(Differs in each country)
T V Setup
Plug & Play
Language : English
Time
Child Lock : On
Change PIN
Game Mode : Off
Melody : Off
Energy Saving : Off
PIP
Move Enter


Return