Samsung SGH-i600 User Manual page 158

3. If you are creating an Ad Hoc network, check This is a
device to device (ad-hoc) connection and press the
Next soft key.
If you do not select this option, the network is added as
an access point network.
4. Set authentication options, enter a network key, set an
index number for the key, and press the Finish soft key.
5. For an access point network, set whether to use IEEE
802.1x network access control select an EAP type, and
press the Finish soft key.
Managing Wi-Fi networks
From the available Wi-Fi network list, you can check the
status of the networks you have saved and change a
network's properties.
On the list, the following icons may appear to indicate the
device status.
• : Secured AP connection
• : Ad Hoc (Device to Device) connection
• : Non-secured AP connection
Press the Menu soft key and select Edit to change the
network properties or Delete to remove the network from
the list.
Getting connected
158