ECS H61H2-M2 User Manual page 52

48
Enhanced Intel SpeedStep Technology (Enabled)
This item allows users to enable or disable the EIST (Enhanced Intel SpeedStep
Technology).
Press <Esc> to return to the M.I.B III Menu page.
Chipset OverClocking Configuration
Scroll to this item to view the following screen:
Main Advanced
Memory Multiplier Configuration
Performance Memory Profiles
Memory Timing Configuration
CAS# Latency(tCL)
RAS# to CAS# Delay(tRCD)
Row Precharge Time(tRP)
RAS# Active Time(tRAS)
Write Recovery Time(tWR)
Row Refresh Cycle Time(tRFC)
Active to Active Delay(tRRD)
Write to Read Delay(tWTR)
Read CAS# Precharge(tRTP)
Four Active Window Delay(tFAW)
Intel Graphics Configuration
Graphics Core Ratio Limit
Graphics Voltage(1/256)
Performance Memory Profiles (Automatic)
This item allows you to select the memory mode: Automatic, Manual, XMP Profile
1 or 2.
CAS# Latency(tCL) (8)
This item determines the operation of DDR SDRAM memory CAS (column address
strobe). It is recommended that you leave this item at the default value. The 2T
setting requires faster memory that specifically supports this mode.
RAS# to CAS# Delay(tRCD) (8)
This item specifies RAS# to CAS# delay to Rd/Wr command to the same bank.
Row Precharge Time(tRP) (8)
This item specifies Row precharge to Active or Auto-Refresh of the same bank.
RAS# Active Time(tRAS) (24)
This item specifies the RAS# active time.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset M.I.B III
[Automatic]
8
8
8
24
10
74
4
5
5
20
22
0
Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.
Using BIOS
Boot Security Exit
The selection of Performance
Memory Profiles which impacts
memory sizing behavior.
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
:Select Screen
:Select Item