Add New Device
At the Bluetooth menu, select Registered List
The "Place device you are connecting to in discovery mode" message
appears in the display.
If Bluetooth is off, you are prompted to "Turn bluetooth on?".
• To turn Bluetooth on, press the Yes soft key.
• To leave Bluetooth off, press the No soft key.
Press OK (
3.
Place the Bluetooth device in discoverable mode. (For more information,
4.
refer to the device user manual.)
Press
5.
Highlight the device you want to pair with your phone.
6.
Press PAIR (
7.
prompted to enter the Passkey for the selected device. (For more
information, refer to the device user manual.)
Enter the device Passkey and press
8.
Note: When pairing with another Bluetooth phone, enter whatever Passkey you
wish. You must, however, enter the same Passkey into the other phone
when prompted.
You are prompted to verify that you want to connect with the device.
To connect with the device, press the Yes soft key.
9.
To bypass connecting with the device, press the No soft key.
68
) to continue.
. Names of the available devices appears in the display.
) to pair the selected device with the phone. You are
Add New Device.
.