Sony MHC-D60 Operating Instructions Manual page 7

3
4
5
6
7
Downloaded From Disc-Player.com Sony Manuals
Turn the jog dial.
The frequency indication changes and
scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo program) appear.
AUTO
Press TUNER MEMORY.
A preset number appears in the display.
Preset number
AUTO
Turn the jog dial to select the preset
number you want.
Press ENTER/NEXT.
The station is stored.
Repeat steps 1 to 6 to store other
stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly to select
"MANUAL" in step 2, then turn the jog dial
to tune in the station.
To change the preset number
TUNED
Start over from step 1.
STEREO
VOLUME
To change the AM tuning interval
MHz
(Except for the Middle Eastern model)
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval, tune in any AM station first, then turn off
the power. While holding down the ENTER/NEXT
button, turn the power back on. When you change
the interval, AM preset stations will be erased. To
TUNED
reset the interval, repeat the same procedure.
STEREO
VOLUME
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
7