Recording Function; Recording Speed - Samsung MX-H630 User Manual

Hide thumbs Also See for MX-H630:
Table of Contents

Advertisement

Recording Function

You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1.
Connect an external USB storage device to the USB (
jack on your product.
2.
Play a disc, tune to a station, or connect an external
source to your product.
CD
• Press the MP3/CD button on the main unit to select
the CD function.
• Press the OPEN/CLOSE button to open the disc tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use the CD selection buttons ( [ or ] ) to select the
desired song.
Tuner
• Select TUNER by pressing the TUNER/AUX button.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to your
product.
• Press the TUNER/AUX button to select <AUX> input.
• Play a song from the external device.
3.
Press the USB REC button to start recording.
CD
• "TRACK RECORDING" is displayed and C D
recording starts.
• Press and hold the USB REC button to start recording
all tracks on the disc. "FULL CD RECORDING" is
displayed.
MP3-CD
• Press the USB REC button. The currently playing file
is copied onto the USB device.
• Press and hold the USB REC button. All the files in
the current folder are copied onto the USB device.
• When you connect a Microphone, press the USB
REC button. The currently playing file is recorded onto
the USB device, and the sound from the Microphone
is recorded too.
MP3 RECORDING: "MP3 RECORDING""RECORD"
CD COPY: "CHECK""START""COPY XX""COPY
END"
is displayed. When the recording is done, "STOP" will
be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• RECORD is displayed.
4.
To stop recording, press the STOP (@) button. The unit
automatically creates and saves recorded files in .MP3
format (SAM-XXXX.MP3).
5.
After recording, a directory named
"RECORDING(DISCxxxx)"(FULL CD RECORDING),
"RECORDING"(TRACK RECORDING), "CD COPY"(MP3
CD), "MP3 RECORDING"(MP3 CD), "TUNER
RECORDING" or "AUX RECORDING" is created on your
USB device.
• Do not disconnect the USB or the AC Cord during
recording as this may cause damage to the file.
)
• WMA/MP2 files can be copied but not recorded.
• If you disconnect the USB device during a recording,
the unfinished recording file may get damaged and
cannot be deleted. If this occurs, please connect the
USB device to a PC and backup the data stored in the
USB first, and then format it.
• When the USB memory has insufficient free space, the
system will display "NOT ENOUGH MEMORY".
• The USB device or HDD you are recording to must be
formatted in the FAT file system. The NTFS file system is
not supported.
• When you use the CD high speed search function, CD
recording is not available.
• Sometimes, the recording time may be longer with
some USB devices.
• In the program mode, you can't use the CD recording
function.
• The equalizer is set to "OFF" automatically and is not
available during a CD recording.
• The GIGA SOUND function is set to "OFF" automatically
and is not available during a CD recording.
• The REPEAT function is set to "OFF" automatically and
is not available during a CD recording.
• If you use the MIC function during a CD recording, the
sound from the microphone will be recorded.
• You cannot record the radio when searching or if no
stations are available in the Tuner mode.
• Note that setting the input level too loud when recording
music from an external device through the AUX or USB
channel may cause noise in the recording. If this occurs,
lower the external device's volume level.
• The maximum TUNER/AUX recording time is 5 hours.

Recording Speed

You can select the recording speed before recording.
Each time you press the CD REC SPEED button
on the remote control, the recording speed will
change as follows:
RECORD SPD X 1 ; RECORD SPD X 3
• When you record from the tuner or an external source, you
cannot change the recording speed.
• If you select RECORD SPD X 3, sound is not produced
during the recording.
• If you connected the microphone, you have one recording
speed mode available: RECORD SPD X 1.
• During recording, if you disconnect the microphone, the
recording will stop. If you reconnect the microphone, the
recording will not restart.
15
14
English
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-h730

Table of Contents