Message Expansion Card For Disa/Ucd Ogms (Kx-Te82491) - Panasonic KX-TES824 Installation Manual

Advanced hybrid system
Hide thumbs Also See for KX-TES824:
Table of Contents

Advertisement

2.3 Installing Optional Service Cards
2.3.7
Message Expansion Card for DISA/UCD OGMs (KX-
TE82491)
Function
When an optional message expansion card for DISA/UCD OGMs is added, up to 2 messages can be
played simultaneously for callers and the total recording time of the PBX is increased from 3 to 6
minutes.
1.
Loosen the screws and open the top and bottom front covers. (→ 2.2.3 Opening/Closing Covers)
2.
Slide the card between the guiderails until it clicks, and attach the connector to it.
Note
Use extra care to make sure you do not damage the part of the case marked with a circle.
3.
Close the covers and secure the screws. (→ 2.2.3 Opening/Closing Covers)
Note
To uninstall the card, follow the instructions illustrated below.
1.
Push the catch on the side of one guardrail in the direction of the arrow to release it.
2.
Lift the edge of the card while holding the catch open. (Do not touch the circuit board of the card
during the operation.)
52
Installation Manual
KX-TE82491
2
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tem824

Table of Contents