Table of Contents
Advertisement
Exploded View and Parts List
14
1) Connect the antenna cable with antenna.
2) Fiting two guide boss hole, push right part then
left part.
※ Caution
1) The smaller connector side of antenna cable
goes to antenna.
16
②
1) Place the Power key on board.
2) Take off the protection tape of Mega and CIF camera.
3) Connect the Key PBA connector.
4) Flip the board and hook the locker.
5) Screw the PBA screws.
6) Connect the LCD connector and and antenna cable.
7) Attach the volume key FPCB
This Document can not be used without Samsung's authorization
①
SAMSUNG Proprietary-Contents may change without notice
15
1) Put the antenna cable into guide path and
cover the guide path with conduction tape.
⑤
④
③
7-9
⑤
⑦
⑥
⑥
Advertisement
Table of Contents
