Specifications - Bosch PBH 2800 RE Original Instructions Manual

OBJ_BUCH-318-004.book Page 16 Friday, October 7, 2011 9:32 AM
16 | English
Product Description and

Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and right/left ro-
tation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Quick change keyless chuck (PBH 3000-2 FRE)
2 SDS-plus quick change chuck (PBH 3000-2 FRE)
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck (PBH 3000-2 FRE)
7 Lock-on button for On/Off switch
8 On/Off switch
9 Thumbwheel for speed preselection
10 Rotational direction switch
11 Release button for mode selector switch
Technical Data
Rotary Hammer PBH ...
Article number
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Delivery Scope
– Keyless drill chuck
Rated power input
Impact frequency at rated speed
Impact energy per stroke according to
EPTA-Procedure 05/2009
Rated speed
No-load speed
– 1st gear
– 2nd gear
Tool holder
Spindle collar diameter
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
1 609 929 T39 | (7.10.11)
12 Mode selector switch
13 Gear selector (PBH 3000-2 FRE)
14 Release button for gear selector (PBH 3000-2 FRE)
15 Button for depth stop adjustment
16 Wing bolt for adjustment of auxiliary handle
17 Auxiliary handle (insulated gripping surface)
18 Depth stop
19 Handle (insulated gripping surface)
20 Securing screw for key type drill chuck*
21 Key type drill chuck*
22 SDS-plus adapter shank for drill chuck*
23 Keyless chuck (PBH 2900 FRE/ PBH 3000 FRE Set)
24 Drill chuck mounting (PBH 3000-2 FRE)
25 Front sleeve (PBH 2900 FRE/
PBH 3000 FRE Set/PBH 3000-2 FRE)
26 Rear sleeve (PBH 2900 FRE/
PBH 3000 FRE Set/PBH 3000-2 FRE)
27 Extraction sleeve of the dust extraction attachment*
28 Clamping screw for the dust extraction attachment*
29 Depth stop of the dust extraction attachment*
30 Telescopic pipe of the dust extraction attachment*
31 Wing bolt of the dust extraction attachment*
32 Guide pipe of the dust extraction attachment*
33 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
2800 RE 2900 FRE
3 603 C93 0.. 3 603 C93 1..
–
–
W 720
-1
min 4000
J 2.6
-1
min 1100
-1
min 0–1450 0–1450
-1
min –
SDS-plus SDS-plus
mm 43
3000 FRE Set 3000-2 FRE
3 603 C93 2.. 3 603 C94 2..
– –
730 750
4000 4000
2.7 2.8
1100 1100
0–1450 0–1450
– – 0–3000
SDS-plus SDS-plus
43 43
Bosch Power Tools
750
4000
2.8
1100
43