Activate Your Phone - Motorola moto x User Manual

Caution: Before using your phone, please read the safety, regulatory and legal information
provided with your product.
1. Plug the USB connector into the charger/accessory jack on the bottom of your phone.
2. Plug the AC adapter into an electrical outlet. Fully charging a battery may take up to three hours.
Your phone may turn on when you connect the AC adapter to the outlet—this is normal.
Note: This product uses a non-removable battery. The battery should only be replaced by a
Motorola-approved service facility. Any attempt to remove or replace your battery, unless performed
by a service representative, may damage the product and void your warranty.
3. Press and hold the Power key to turn the phone on.
If your phone is activated, it will turn on, search for Sprint service, and show setup
l
instructions.
If your phone is not yet activated, see Activate Your Phone for more information.
l
Note: If your phone becomes unresponsive, try a forced reboot—press and hold the Power key for
about 10 seconds until the screen goes dark and the smartphone restarts.
Any time you want to see what's using up phone battery power, touch Apps
Battery.

Activate Your Phone

Depending on your account or how and where you purchased your phone, it may be ready to use or
you may need to activate it on your Sprint account.
Get Started
> Settings >
2