Rear Panel - Toshiba RD-XV45KB Instruction Manual

E439BBD_EN.book Page 16 Wednesday, May 31, 2006 4:01 PM

Rear Panel

1
1 Mains cable
• Connect to a standard AC outlet.
2 AV2(DECODER) (HDD / DVD / VCR)
• Connect to VCR, camcorder, or other
Audio-Video equipment. Use a commercially
available Scart cable.
3 AV1(TV) (HDD / DVD / VCR)
• Connect to the Scart socket on your TV. Use a
commercially available Scart cable.
4 DIGITAL AUDIO OUT (COAXIAL) jack
(HDD / DVD)
• Connect to an amplifier with a digital input jack
such as a Dolby Digital decoder or DTS
decoder. Use a commercially available Coaxial
cable.
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.
• This unit does not have an RF modulator.
16
EN
HDD / DVD / VCR
HDD/DVD
AUDIO
DIGITAL
AV2 (DECODER)
AUDIO OUT OUT
COAXIAL
AV1 (TV)
2 3 4 5
5 AUDIO OUT jacks (HDD / DVD)
• Connect to the audio input jacks on your TV.
Use a commercially available Audio cable.
6 S-VIDEO OUT jack (HDD / DVD)
• Connect to the S-Video input jack on your TV.
Use a commercially available S-Video cable.
7 AERIAL (HDD / DVD / VCR)
• Connect to an antenna or cable.
8 RF OUT (HDD / DVD / VCR)
• Connect to the Aerial jack on your TV, cable box
or direct broadcast system.
Use the supplied RF cable.
S-VIDEO
OUT
HDD/DVD/VCR
AERIAL
L
R
RF OUT
6 7 8