General; Automatic Switching Between Colour And B/W Mode; Rs-485 Connection - Siemens CCAW1417-LPO Configuration Manual

Connection
8.1

General

8.1.1

Automatic switching between colour and B/W mode

8.1.2

RS-485 connection

22
Siemens AG
TP output selector switch location
After removal of the flat-head cap the DIP switch is visible.
Fig. 11 Bottom view of the camera
1 Flat-head cap
The camera must be connected to an external sensor to receive day/night
detection signals.
4
2
3
1 External sensor switch
2 External input (EXT-In)
3 External output (EXT-Out)
4 GND
Positions of the external sensor switch (1)
Activate alarm: closed
EXT-IN
Deactivate alarm: open
Alarm activated: 5 V
EXT-OUT
Alarm deactivated: 0 V
To activate the sensor inputs, select the mode EXT in the function menu B/W.
The camera can be controlled remotely by an external device or control system,
such as a control keyboard, using RS-485 half-duplex. Connect marked Rx+, Rx-
to Tx+ and Tx- of the RS-485 control system.
1
1
Grey
White-Black
Black
03.2011