Table of Contents
Advertisement
Precautions
Front Panel
Switches between standby mode
and active mode.
Lights up in standby mode.
2
• Clean with a dry cloth only.
• Do not block any of the ventilation openings.
• When placed in a cabinet, make sure there is a minimum space of 10 centimetres
around it.
• Do not install near any heat sources or in direct sunlight as this will impair
cooling.
• Do not operate this product near water.
• Do not try to change the plug or defeat its safety purpose.
• This product is designed for indoor use only.
• Place the digital receiver on a firm and level surface.
• Do not lay any objects such as magazines on this unit.
• Do not overload power outlets. Doing so may result in a risk of fire or electrical
shock.
• Never open this unit's casing under any circumstances, or the warranty will be
void.
• Unplug this unit during lightning storms or when unused for long periods of
time.
• Refer all servicing to qualified service personnel. Reverse engineering or disas-
sembly is prohibited.
• Batteries, including those which contain no heavy metals, may not be disposed
with other household wastes. Please dispose of used batteries in an environ-
mentally sound manner. Find out the legal regulations which apply in your
area.
• The mains plug shall remain readily operable so that it can be removed easily
to disconnect the power.
• Operate the digital receiver at temperatures between 0 to 45
• The mains voltage must range between 90 and 250 volts. Check it before plug-
ging the digital receiver to the wall socket. For the power specification, refer to
the table below.
Input voltage
90 to 250 V AC, 50/60 Hz
Power consumption
35 W at maximum in active
Under 1 W in passive standby
Blinks every time you press a
button on the remote control.
Decrease or increase the volume.
Switch to the previous
or next service.
◦
C.
Advertisement
Table of Contents
