Using Pc Camera; Installing The Software; Starting The Application - AIPTEK POCKET DV 8800 NEO User Manual

Using PC Camera

Installing the software

The PC camera software is included in the camera driver, and
therefore you should install the driver before using the PC
camera function. If you have not yet installed the driver, see
page 31 for details on the installation.

Starting the application

1
Turn on the camera and connect
the camera to your computer.
Turn on the camera, and then connect the
camera to your computer using the accessory
USB cable. See page 33 for more details.
2
Switch to Camera mode.
Press the Menu button to bring up the
options menu. Use the Direction buttons
to select the Camera item and press the
OK key to confirm.
The default is set to "Disk" mode, if you
would likt to set other modes, please
refer to "USB Mode" section on page 29
for more information.
If you want to use the Video Conferencing function, please install
programs such as Netmeeting to serve the purpose.
38