Ariston Margherita Dialogic AD 1200 Instructions For Installation And Use Manual page 21

No iron
Press to select the desired
function.
This option allows you to obtain
crease-free washing which is
easier to iron.
The appliance optimises the
washing conditions according to
the type of fabrics that are being
washed.
To select it, press until the
word ON appears on the display.
In the Synthetics and
Delicates, programmes the
wash cycle is interrupted and the
washing is left to soak in water
before the appliance is drained.
To complete the cycle, press the
button.
The selection of this option is
indicated by symbol
appearing.
Note: this function is not
available with the Stain
Removal option.
Special programmes
Press to select the desired
function.
If you set this option, the
following options will be
displayed:
Special (OFF)
•
Rinse only
•
Spin cycle only
•
Drain
•
To select the desired "special
programme", press , to
confirm your selection press .
If you don't wish to select a
special programme, press
when the wording "Special"
(OFF) comes up on the display.
Special wash programmes
Class A at 40°C: Your
low temperatures.
The results are the same as you would get with a 60°C wash, thanks to the washing machine's action and
to the increase in the duration of the wash.
To set this programme, place the mark situated on the knob completely to the left and set the temperature
to 40°C.
The wording "CLASS A" will appear on the display.
Daily:
time.
You can wash different types of fabrics together (except for wool and silk), with a maximum load of 3 kg.
This programme allows you to save on both time and energy as it only lasts approximately 30 minutes.
WE RECOMMEND THE USE OF LIQUID DETERGENT.
To set this programme, turn the index situated on the knob to any position in the synthetics sector, select
a temperature of 30°C and select the Rapid option
The wording "DAILY" will appear on the display.
Note: these programmes were designed to provide you with the best performance levels and therefore
cannot be modified; you may only reduce the spin cycle speed and delay the programme start.
Settings
Press buttons and
same time for at least 4 seconds
to access the personalisation
menu, where you can choose
your language and the display
brightness.
The word “DÝL SEÇÝMÝ “
(LANGUAGE) will appear; press
to display the language set. If
you want to change the language
set, just scroll along the
languages available by pressing
and confirm your selection by
pressing .
To adjust the brightness of the
display, press both buttons
and at the same time for at
least 4 seconds: the word ‘’DÝL
SEÇÝMÝ “ (LANGUAGE) will
come up; press to display the
wording “GOSTERGE
AYDINLÝÐÝ” (DISPLAY
BRIGHTNESS).
Press to display the brightness
set; if you want to change it,
scroll along the three brightness
levels available with
select the desired one with .
Special displays
After the first wash cycle…..
The water hardness level is
displayed for 10 seconds, and you
can adjust the amount of
detergent you use accordingly:
Low
Medium
High
and subsequently:
has a special programme to obtain excellent wash results even at
has a programme designed to wash lightly soiled garments in a short amount of
the indication of the fabric
•
sector selected (COTTON,
at the
COLOURS, SYNTHETICS,
DELICATES and WOOL)
the temperature corresponding
•
to the wash programme set
the recommended wash load:
•
after pressing Start, the
•
estimated duration of the cycle is
displayed; if you have set the
Delay timer the countdown
to the wash programme start is
displayed.
During the wash cycle…
The following are displayed:
the amount of time left
•
the temperature, during the
•
heating phase (on the scale on the
right-hand side of the display);
and
once heating is over and for the
entire duration of the cycle,
the weight of the load inside the
appliance:
the wash phases (pre-wash,
•
heating…)
the options selected.
•
Door locked
Symbol on indicates that the
washing machine door is locked to
prevent it from being opened
accidentally. Wait for symbol
turn off before you open the
appliance door.
.
Error message
In the event of a fault, a message
is displayed, (e.g. F-01), which
should be communicated to the
Service Centre.
End of the programme
At the end of the programme, the
word END is displayed.
If you have used too large a dose
of detergent, symbol
up.
This washing machine
nevertheless guarantees a perfect
rinse.
HYDROSTOP
To look after
garments, the appliance
may sometimes stop
with water in the tub,
leaving the wash to
soak.
Press to end the wash
cycle.
Demo Mode
The appliance is equipped with
a demo mode.
If the wording "DEMO MODE"
appears among the wording that
appears on the display, you
should disable it by following
these few simple steps:
- turn the appliance off at the
ON-OFF (C) button.
- keep Start/Reset (B) button
pressed and turn the appliance
back on at the same time.
to
From now on the demo mode is
no longer enabled.
- Instructions for installation and use
lights
your
18