Driver Alert Control (Dac) - Operation; Driver Alert Control (Dac) - Function - Volvo S80 Owner's Manual

•
Driver Alert System (p. 210)
•
Lane Departure Warning (LDW) – intro-
duction (p. 215)
Driver Alert Control (DAC) – operation
Operating DAC
Settings are made using menu system and
the display in the center console. See My Car
– introduction (p. 70) for more information on
the menu system.
On/Off
To put Driver Alert in standby mode:
•
In the MY CAR menu, scroll to
settings Driver support systems
Driver Alert
and check the box. If the box
is not checked, the function is off.
Related information
•
Driver Alert Control (DAC) – introduction
(p. 210)
•
Driver Alert Control (DAC) – function
(p. 211)
•
Driver Alert Control (DAC) – limitations
(p. 212)
•
Driver Alert Control (DAC) – symbols and
messages (p. 213)
•
Driver Alert Control (DAC) – introduction
(p. 210)
•
Lane Departure Warning (LDW) – intro-
duction (p. 215)
07 Driver support
Driver Alert Control (DAC) – function
Function
Driver Alert is activated when the vehicle
exceeds a speed of 40 mph (65 km/h) and will
remain active as long as the speed is over
approx. 37 mph (60 km/h).
If the vehicle is being driven errati-
cally, the driver will be alerted by an
audible signal and the message
Car
Driver Alert Time for a break
displayed. The warning will be repeated after
a short time if the driving pattern remains the
same.
Press the OK button to erase a message.
WARNING
•
An alert should be taken seriously
since it is sometimes difficult for a
driver to realize that he/she is fatigued.
•
In the event of a warning or if the
driver feels fatigued, stop as soon as
possible in a safe place and rest.
Related information
•
Driver Alert Control (DAC) – introduction
(p. 210)
•
Driver Alert Control (DAC) – operation
(p. 211)
•
Driver Alert Control (DAC) – limitations
(p. 212)
is
07
}}
211