Attaching The Rack-Mounting Brackets - Nortel Ethernet Routing Switch 8010 Installation Manual

Attaching the Rack-Mounting Brackets

Required tool: Phillips screwdriver
Note: Each bracket fits only one side of the chassis. If the mounting holes do not line up
between a bracket and the chassis, try that bracket against the other side of the chassis.
Hold each rack-mounting bracket against
1.
one side of the chassis. Make sure the
attachment holes in the bracket match the
holes in the chassis.
4
9103FA
Insert the supplied flat-head screws to fasten
2.
each bracket to the chassis.
9104FA