Setting; Setting Menu - Sanyo PLC-SE10 Owner's Manual

SETTING

1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red-frame pointer to
SETTING icon.
2
Press POINT DOWN button to move a red-frame pointer to the
item that you want to set and then press SELECT button.
Setting dialog box appears.
Language
Language used in ON-SCREEN MENU is selectable from among
English, German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Chinese, Korean and Japanese.
Keystone
When the image is distorted, select Keystone. ON-SCREEN MENU
disappears and Keystone dialog box is displayed. Correct keystone
distortion by pressing POINT UP/DOWN/LEFT/RIGHT button(s).
Refer to KEYSTONE ADJUSTMENT on page 20.
Blue back
When this function is "On," this projector will produce a blue image
instead of the video noise on the screen when any input source is
unplugged or turned off.
Display
This function decides whether to display On-Screen Displays.
On ··· shows all the On-Screen Displays.
Off ···· sets On-Screen Displays disappeared except;
G ON-SCREEN MENU
G "Power off?" message
Logo
When this function is "On," projector displays our logo when starting
up.
Ceiling
When this function is "On," picture is top / bottom and left / right
reversed. This function is used to project the image from a ceiling
mounted projector.
Rear
When this function is "On," picture is left / right reversed. This
function is used to project the image to a rear projection screen.

SETTING MENU

SETTING MENU
Set a red frame
pointer to the item
and press SELECT
button.
Move a pointer to the item
and then press POINT
LEFT/RIGHT button(s).
Ceiling function
Rear function
SETTING Menu icon
When pressing SELECT
button at Language,
Language Menu appears.
35