Installing The Axis 231D/232D; Hardware Inventory - Axis 231D Installation Manual

Installing the AXIS 231D/232D

Please observe the following before installing the AXIS 231D/232D Network Dome
Camera.
• Handle the camera carefully, avoid striking, shaking, etc. The camera could be damaged by improper handing or
storage.
• Do not disassemble the camera, there are no user serviceable parts inside. To prevent electric shock, do not
remove screws or covers. Also, refer to the Axis Warranty Agreement packed with the unit.
• Do not block cooling holes on the bracket. This camera has a cooling fan inside. Blocking the cooling holes may
cause the camera to overheat and malfunction.
• This product is designed for indoor use or locations where it is protected from rain and moisture. To operate the
camera in these conditions, use the outdoor housing accessories.
• Do not use strong or abrasive detergents when cleaning the casing. Use a mild detergent and wipe gently.
• Never position the camera directly towards the sun or other bright objects. Whether the camera is in use or not,
never aim it at the sun or other extremely bright objects.

Hardware Inventory

Check the items supplied with your AXIS 231D/232D against the following list:
Item
Network Dome Camera
Connection Module
Connection Module Cable
Indoor Power Supply with
power cable
Mounting Kits
This document
Warranty Document
Optional accessories are available for mounting on ceiling, wall, corner and pole, for both
indoor and outdoor use. For more information, please visit the Axis Web site at
http://www.axis.com
Before you begin
If the AXIS 231D/232D is to be mounted in a position where it is difficult to access, it is
recommended that you set the IP address and get the camera up and running before
completing the hardware installation.
Title/Variants
AXIS 231D/232D
Europe
UK
Australia
USA/Japan
Korea
Hard Ceiling Mount for Indoor Use
Inset Ceiling Mount for Indoor Use
AXIS 231D/232D User's Manual
Installing the AXIS 231D/232D
The power supply is country
specific, please check that the
type of power supply you are
using is correct.
5