Wash Options - Indesit DFP5841M Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Wash options

The OPTIONS may only be set, modified or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of
wash cycle set may be selected. If an option is not compat-
ible with the selected was cycle (see Table of wash cycles) ,
the corresponding LED flashes rapidly 3 times.
If an option is selected which is incompatible with another
option or wash cycle selected previously, the incompat-
ible option light will flash 3 times and switches off, while
the most recently selected setting remains lit.
To deselect an option which has been set by mis-
take, press the corresponding button again.
Delayed start
The start of the wash cycle may be delayed for a period of
time between 1 and 24 hours.
1. After selecting the desired wash cycle and any other
options, press the DELAYED START button: the
corresponding indicator light will illuminate. Use the same
button to select the time at which you wish the wash cycle
to begin (after a period of 1 to 24 hours).
2. Confirm your selection using the Start/Pause button; the
countdown will begin. The selected delay period indicator
light is displayed and the Start/Pause button stops flashing
(the light becomes fixed instead).
3. When the set time has elapsed, a long beep sounds, the
DELAYED START indicator light switches off and the wash
cycle begins.
To deselect the DLEAYED START option, press the
DELAYED START button repeatedly until the text OFF
appears.
The Delayed Start function cannot be set once the
wash has been started.
Table of options
Delayed
1. Eco
2. Auto Normal
3. Soak
4. Auto Intensive
5. Rapide
6. Delicate
7. Intensive Speed +
8. Normal Speed +
A
B
C
Half
Tabs
Start
Load
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Half load
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
detergent. Select the wash cycle and press the HALF LOAD
button: the indicator light will illuminate.
Remember to halve the amount of detergent.
It is better to use powder detergent in this case.
This option is incompatible with the following wash
cycle: Rapid wash.
Multi-functional tablets (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button. The corresponding indicator
light will illuminate. The "Multi-functional tablets" option results
in the lengthening of the wash cycle.
The MULTI-FUNCTIONAL TABLETS option remains
set for subsequent wash cycles if it is not deselected.
The use of tablets is only recommended for models
which offer the MULTI-FUNCTIONAL TABLETS option.
This option is not recommended for use with wash
cycles which do not specify the use of multi-functional
( see Table of options ).
tablets
This option is incompatible with the following wash
cycle: Soak.
*
Only available in selected models.
EN
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfp5731m

Table of Contents