Carrier 52M Performance Series Product Data page 25

DIMENSIONAL DRAWINGS AND INSTALLATION DATA - -
NEW CONSTRUCTION (CONT.)
WALL SLEEVE MOUNTING DIMENSIONS FOR STANDARD AND ACCESSORY GRILLES
Standard Polymer Non- -Insulated Wall Sleeve
Standard Polymer Insulated Wall Sleeve
STANDARD OUTDOOR GRILLE
NOTES (All Sleeves):
1. Never install fasteners through bottom of sleeve.
2. Never use rails to level sleeve.
MAIN STUD
JACK STUD
CRIPPLE
FLOOR
SUB-FLOOR
Framing and Minimum Wall Sleeve Opening
5/8" MIN.
(16)
SIDE
1/2" MINIMUM
Wall Sleeve Mounting (All Models)
A07633
Standard and Extended Metal Insulated Wall
JACK STUDS
HEADER- 4' x 4' OR
(2) 2' x 4' ON EDGE
16 1/4"
42 1/8"
5/8" MIN.
(16)
1/2" MINIMUM
ARCHITECTURAL GRILLE
STANDARD MOUNT
ALUMINUM OR PLASTIC
25
42 in.
Sleeve
A07382
SIDE
A07383
16 in.
Available in:
14-3/4 in.,
18 in.,
24 in.,
26 in.,
28 in.
A07381