Carrier 52M Performance Series Product Data page 17

FIELD- -INSTALLED ACCESSORIES (CONT.)
Insulated Metal Wall Sleeves
Part No.: SLEEVE- -STEEL- -1PK
Part No.: SLEEVE- -EXT18- -1PK
Part No.: SLEEVE- -EXT24- -1PK
Part No.: SLEEVE- -EXT26- -1PK
Part No.: SLEEVE- -EXT28- -1PK
Carrier's metal wall sleeves are available in a variety
of sizes for most applications and difficult
installations. Choose from 14- -3/4 in., 18 in., 24 in.,
26 in., or 28 in. standard depth sizes. All metal wall
sleeves come with factory- -installed insulation,
designed to minimize heat loss, reduce outdoor noise
transmissions into the room and prevent sleeve
sweating. In addition, the metal wall sleeve provides
a flammability rating higher than UL94- -5V.
Wall Sleeve Molding Kit
Part No.: SLEEVE- -MOLDING
For a superior look and to hide any construction
imperfections, use Carrier's wall sleeve molding kit
to trim the wall sleeve to the wall. The molding kit is
a perfect solution and can be used with any Carrier
wall sleeve (matches Carrier wall sleeve color).
Friedrich (and ZoneAire) Retrofit Wall Sleeve
Adapter
Part No.: FR- -SLEEVE- -EXT
The Friedrich (and ZoneAire) wall sleeve adapter is
constructed of sheet metal and is designed to increase
the depth of an existing Friedrich T- -series or
ZoneAire wall sleeve to accommodate Carrier's
industry standard PTAC units.
Climate Master Wall Sleeve Adapter
Part No.: CM- -SLEEVE- -EXT
The Climate Master wall sleeve adapter is constructed
of sheet metal and is designed to increase the depth of
an existing Climate Master 12- -1/2 in. wall sleeve to
accommodateCarrier'sindustrystandard PTACunits.
Standard and Extended Metal Wall Sleeve
1/2 IN.
Wall Sleeve Molding Kit
16 IN.
3 IN.
Friedrich Wall Sleeve Adapter Kit
16 IN.
1 1/2 IN.
Climate Master Wall Sleeve Adapter Kit
17
42 in.
16 in.
Available in:
14-3/4 in.,
18 in.,
24 in.,
26 in.,
28 in.
A07
1 IN.
42 IN.
42 IN.