Capacities And Specifications - 2.0L Ecoboost - Ford 2017 FUSION Owner's Manual

Table of Contents

Advertisement

Note: Ford recommends using DOT 4 Low
Viscosity (LV) High Performance Brake Fluid
or equivalent meeting WSS-M6C65-A2. Use
of any fluid other than the recommended
fluid may cause degraded brake
performance and not meet the Ford
performance standards. Keep brake fluid
clean and dry. Contamination with dirt,
water, petroleum products or other
materials may result in brake system
damage and possible failure.

CAPACITIES AND SPECIFICATIONS - 2.0L ECOBOOST

Capacities
The air conditioning refrigerant system contains refrigerant under high pressure.
Only qualified personnel should service the air conditioning refrigerant system.
Opening the air conditioning refrigerant system can cause personal injury.
Engine oil (with oil filter).
Engine coolant.
Brake fluid.
Rear differential (All Wheel Drive) fluid.
Power Transfer Unit (PTU) fluid (All Wheel
Drive).
Automatic transmission fluid.
Windshield washer fluid.
Fuel tank (Front Wheel Drive).
Fuel tank (All Wheel Drive).
A/C refrigerant.
A/C refrigerant compressor oil.
*
Approximate dry fill capacity. Actual amount may vary during fluid changes.
Fusion (CC7) Canada/United States of America, enUSA, First Printing
Capacities and Specifications
WARNING
Item
Note: Automatic transmissions that require
MERCON LV transmission fluid should only
use MERCON LV transmission fluid. The
use of any other fluid may cause
transmission damage.
Capacity
5.7 qt (5.4 L)
8.5 qt (8 L)
Between MIN/MAX on brake fluid reservoir
2.4 pt (1.15 L)
11.8 fl oz (0.35 L)
9.0 qt (8.5 L)
Fill as required
16.5 gal (62.5 L)
18 gal (68.1 L)
22 oz (0.62 kg)
5.24 fl oz (155 ml)
333
*

Advertisement

Table of Contents
loading

Table of Contents