■
DVB-C, DVB-T, Analogue
1. Select
Auto Setup
2. Set
DVB-C Auto Setup Settings
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with
After settings, select
●
3. A confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
and press
OK
to access.
and press
Symbol Rate
Numeric
buttons.
Start scan
and press
- 103 -
OK
to store. (DVB-C)
and
Network ID
to Auto. If
OK
to search.
OK
to start
Auto
Auto
Setup.