Table of Contents
Advertisement
2) Set
Satellite
for the selected LNB.
– Select
No Satellite
(Available satellite is searched in
– Select
User defined
– If you set to
SingleCable
(depending on the Single Cable router you use). For details, read
the manual of the Single Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press
BACK/RETURN
6. Select
Auto Setup
7. Select
Search Mode
8. Set the item and press
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select
●
9. A confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
if you do not know the connected satellite.
to set
Test Transponder Frequency
Single
Cable, additional settings are required. Set
Version,
User
Band,
to store.
and press
OK
to access.
/
Scan Mode
and press
OK
to store.
Start scan
and press
- 102 -
Auto
Setup.)
User Band Frequency
OK
to access.
OK
to search.
OK
to start
Auto
manually.
and
PIN
Setup.
- Quick Links:
- How to Use
Hide quick links:
Advertisement
Table of Contents
