GE GFDR485 Owner's Manual And Installation Instructions page 31

Installation Instructions
REVERSING THE DOOR SWING (if desired}
IMPORTANT NOTES
, Read the instructions all the way through before
starting.
, Handle ports carefully to ovoid scratching point.
, Set screws down by their related ports to ovoid
using them in the wrong places.
, Provide a non-scratching work surface for
the doors.
, Normal completion time to reverse the door swing
is 30-60 minutes.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges
from the right side to the left side-if you ever want
to switch them back to the right side, follow these
some instructions and reverse all references
to the left and right.
TOOLS YOU WILL NEED
17 #2 Phillips-head screwdriver
17 T-25 torx driver C1 1/4" nut driver
DOOR PARTS
2-#8xl/2"Screws 6-#8xl/2"Screws
(striker plate) (hinge assembly and
handle spacer)
10 - #8 x 7/8" Screws
(door assembly)
2 - #8 × 1/2" Screws
(door mask)
2 - Panel Plugs 1 - Door Striker
iJ.
1- Door Mask
Ion some models) Ion some models)
2 - #10 x 5/8" Screws 2 - #10 x 5/8" Screws
(hinge) (panel plug)
1 - #8 x ]/8" Screws
(hinge pin)
1 - Chrome Door Cover 1 - Handle Spacer 1 - Handle 1 - Inner Door 1 - Door Plug
Assembly (on some models) Spacer/Latch Assembly (on some models
Assembly
(on some models)
BEFORE YOU START
Unplug the dryer from its electrical outlet.
]2