Cap11a_GB
9-07-2007
16:33
Pagina 78
OVERHAULING THE WHEELS
The tables hereunder show the type of control the rim and
wheel axle are to be submitted to.
Note*: if the rim is badly, it should be re-
placed.
78
DEFORMATION RIM
STANDARD
MAX.LIMIT
less than 0,5 mm
Side skid
(0.02 in)
2 mm
less than 0,8 mm
(0,078 in)
Eccentricity
(0.03 in)
WHEEL RIM AXLE BENDING
If the bending figure is over the allowable max. limit, straight-
en or replace the axle.
If the wheel axle cannot be straightened within the max. limits
(0,2 mm - 0,008 in.) stated, replace it.
WHEEL SPOKES
Check to make sure that all the nipples are tight; tighten them
if necessary.
Remember that an insufficient stretch jeopardizes the motorcy-
cle stability.
For an instant check, use a metal point (for instance, a screw-
driver) to beat the spokes with. A live sound accounts for an ac-
curate tightening, while a dull sound means that a new tight-
ening is necessary.