Polycom SoundPoint IP 430 Quick Start Manual page 3

Attaching the Base Stand
The base stand can be attached to the SoundPoint
Deskmount Method:
Connect all cables.
1
Wallmount Method:
1
On the back of the phone,
remove the key located behind
the hookswitch. Reposition it so
that the end tab (at 45 º angle) is
facing up. This will ensure that
the handset remains in place
within the cradle in a wallmount
position.
2
With mounting tab of the base
unit facing up, fasten the base
stand to wall using wall anchors
(not included). When base
stand is secured to wall and all
cables are connected, snap the
®
SoundPoint
SoundPoint
As soon as power is supplied, the
®
SoundPoint IP 430 starts an automated
process of establishing itself on the
network and downloading software and
applications.
Check with your system administrator
if specific configuration is required for
®
SoundPoint IP 430 Quick Start Guide
2
IP 430 into place.
IP 430 Startup
®
®
IP 430 in one of two ways:
Align tabs of base
stand as shown.
your application software or if any errors
appear during the download process.
For further instructions on how to use
your new SoundPoint
the User Guide available from www.
polycom.com.
Snap firmly
3
into place.
®
IP 430, consult