Wireless; Wireless Settings - TP-Link TL-WR842N User Manual

IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation

(factory default: 192.168.0.1).
Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.
IGMP Proxy - If you want to watch TV through IGMP, please Enable it.


Note:
1) If you change the LAN IP address, you must use the new IP address to login to the Router.
2) If the new LAN IP address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically, but the Virtual Server and
DMZ Host will not take effect until they are re-configured.
4.6

Wireless

Figure 4-15 Wireless menu
There are five submenus under the Wireless menu (shown in Figure 4-15): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click
any of them, and you will be able to configure the corresponding function.
4.6.1

Wireless Settings

Choose menu "Wireless → Wireless Settings", you can configure the basic settings for the
wireless network on this page.
TL-WR842N 300Mbps Multi-Function Wireless N Router User Guide
- 34 -