Philips HP6383 User Manual page 7

1 Put the precision trimming head on the appliance (see section 'Attaching
and detaching the attachments' in chapter 'Preparing for use').
2 Put the comb on the back of the precision trimming head and push it
with your fingers untill you hear a click.
3 Switch on the appliance. Turn the battery compartment cover from
the 'off' position (0) to the 'on' position (I)
4 Move the appliance slowly and with light pressure on the skin against
the direction of hair growth.
Note: Make sure that the flat part of the comb always touches the skin to
obtain an even result.
Note: To make trimming easier, stretch the skin with your free hand during
trimming.
Note: Do not press the appliance with the comb onto the skin too hard.
This may cause the appliance to trim the hairs shorter than the length
indicated on the comb.
Note: In areas where the hair grows in different directions, move the appliance
upwards, downwards and sideways.
5 Regularly remove cut hairs from the comb. If a lot of hairs have
accumulated in the comb, detach the comb from the appliance and
blow and/or shake the hairs out of it.
6 To switch off the appliance, turn the battery compartment cover
from the 'on' position (I) to the 'off' position (0).
7 To detach the comb, put your finger under the bottom edge of the
comb and pull it off the appliance.
EnglisH
7