Radio Operation; Playback Operations - Telefunken TF-1503U Instruction Manual

Instruction manual
• In time setting mode, if no button is pressed
within 10 seconds after a parameter is selected,
the unit will automatically go to clock mode.
• Press DISPLAY button, year/month/date/
time will be displayed in a cycle, press this
button repeatedly to return to clock mode.
AUX input
To connect an external audio device (e.g.
MP3-player), please use a standard stereo
cable with 3.5 mm to 3.5 mm plugs to connect
the audio line-out of the external device to the
AUX input socket of this unit.
LED display functions
• You can turn the display off by setting the
DISPLAY OFF/ON switch to "OFF" position. In
this mode you can switch it on for 10 seconds
by pushing any button or by a loud sound (e.g.
clapping your hands).
• The brightness of the display is set to
be half-bright during 21:00PM - 6:59:59AM.
Alternatively, press the SNOOZE/DIMMER
button to adjust the brightness manually.

Radio operation

• In clock mode press FUNCTION button to
choose the radio mode.
• Press SKIP UP/SKIP DN buttons on the
unit to change the current frequency upwards
or downwards by 100 KHz. Press and hold
SKIP UP/SKIP DN buttons to search the
nearest strong signal station upwards or
downwards automatically. Press MEMORY
button, P01 will blink on the screen. Press
repeatedly MEM-UP/MEM-DN buttons to select
the preset number for the current frequency.
Press MEMORY to save the frequency in
selected position (P01-P20). Press and hold
the MEMORY button: the device will start
scanning from the lowest frequency and
automatically save all available stations in
positions (up to 20). When stations are saved
in the memory, repeatedly press MEM-UP/
MEM-DN buttons to select the saved stations.
4
4
During program saving, if no button is
pressed within several seconds, the unit will
return to normal radio mode.
• To adjust volume level from 00 to 15,
in radio mode press repeatedly VOL+/VOL-
buttons.
• To switch off the radio, hold the FUNCTION
button for 2 seconds.
USB/SD/MMC operation
Connecting USB/SD/MMC
• Insert a USB device into the USB port or
insert a memory card into the memory card
slot. Press FUNCTION button to enable USB
or SD/MMC mode. The unit will start reading
the device.

Playback operations

• During playback press
playback. Press this button again to resume
playback.
• During playback press SKIP DN/UP
buttons to go to previous or next track.
• To adjust volume, press repeatedly VOL+/
VOL- buttons.
• In playback mode, press STOP button to
switch off the player and go to clock mode.
General USB/SD/MMC notes
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0) up to 32 GB.
• This unit is also equipped with an SD/
MMC card socket that can accept and play
MP3 files stored on standard SD/MMC cards
up to 32 GB.
Always switch off the unit or change
mode to another one before removing a
USB flash drive or SD/MMC card, to prevent
damage to your USB device or memory card.
Note: Although this product is fully
compatible with USB 2.0 and SD/MMC card
button to pause