Maintenance And Care - Stihl HSE 61 Instruction Manual

Maintenance and Care

The following intervals apply to normal operating conditions only. If your daily working
time is longer or operating conditions are difficult (very dusty work area, etc.), shorten the
specified intervals accordingly.
Complete machine
Two-hand control
Cooling inlets
Cutting blades
Gearbox and connecting rod
Carbon brushes
All accessible screws and nuts
Safety labels
1)
STIHL recommends a STIHL servicing dealer.
2)
Spray with STIHL resin solvent after cleaning
HSE 61, HSE 71, HSE 81
Visual inspection
Clean
Check function – the cutting blades must
quickly come to a standstill when the trig-
ger switch or switch lever, or the trigger
switch, or auxliary switch is released
Visual inspection
Clean
Visual inspection
2)
Clean
1)2)
Sharpen
Replace
1)
Have checked by servicing dealer
every 50 hours of operation
Have gearbox topped up with STIHL gear
1)
lubricant by servicing dealer
1)
Have checked by servicing dealer
every 100 hours of operation
1)
Have replaced by dealer
Retighten
Replace
X
X
X
X
X
X
after
after
English
X
X
X
X
X
X
X
33