English
Setting DIP Switches
When you open the ink cartridge cover and remove the DIP switch
cover, you will find the DIP switches. Set the DIP switches, using the
tip of a tool, such as a small screwdriver. Change settings when the
printer is off.
SW
1
Operation of the power switch
2
Internal use
3
Paper selection
7
Internal use
8
Buzzer volume
Installing Paper
CAUTION:
Be sure to confirm that DIP switch 3 (Paper selection) is set correctly
before installing the paper.
Make sure paper is ejected straight from the paper ejection guides, as
shown in the illustration. If paper is not ejected straight due to such
causes as an obstruction, the print result may be distorted.
10 TM-C3400 User's Manual
Function
ON
Reset
Power on/off
Fixed to OFF (Do not change.)
Fanfold paper
Roll paper
Fixed to OFF (Do not change.)
High
Low
OFF