Cooling Mode (Cool); Dehumidifying Mode (Dry) - Vaillant VAI 6-025 WN User Manual

OPERATING INSTRUCTIONS
7.5.2

Cooling mode (COOL)

In cooling mode (COOL), the Air to Air heat pumps unit only
allows cooling.
NOTE:
i
In cooling mode it is recommendable to direct the
front louvres horizontally.
4
3
Fig. 7.5 Cooling mode selection.
Legend
1 MODE button
2 - / + button
3 FAN button
4 COOL mode indicator
In order to activate:
With the unit switched on (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
Fig. 7.6 Operation modes.
- 10 -
• Select the cooling operation mode (COOL).
• Press the - / + buttons to select the temperature setting.
When pressing the - / + buttons, the temperature
configuration will increase or decrease by 1ºC.
• Press the FAN button to select the fan speed.
Each time the FAN button is pressed, the fan speed will be
modified as shown in Figure 7.7.
Fig. 7.7
NOTE:
i
In cooling mode, prolonged use of the unit under
conditions of considerable air humidity can cause
drops of water to fall from the outlet louvres.
1
7.5.3
In dehumidifying mode (DRY), the Air to Air heat pumps unit
2
operates by reducing the humidity from the atmosphere.
Fig. 7.8
Fan speed.

Dehumidifying mode (DRY)

3
Dehumidifying mode selection.
VAI6-WN-U_EN - 06/14 - Vaillant
1
2