The Method Of Attachment Of Lc-084 Flexible Board - Sony Syber-shot DSC-L1 Service Manual

2-3. THE METHOD OF ATTACHMENT OF LC-084 FLEXIBLE BOARD

1 Insert the plate of lens cover motor
in the slot on the front cabinet.
7 Check that the LC-084 flexible board has fitted into eight claws exactly.
DSC-L1
2 Insert the gear of lens cover motor, as you don't
collide with the gear of lens cover.
Claw Claw
Claw Claw Claw
2-7
2. DISASSEMBLY 2. DISASSEMBLY
3 As you make the right rotate the gear of lens cover
motor, engage with the gear of lens cover.
S401
Claw
(Open detect switch)
Claw
Claw
precision screw driver, etc.
5 Assemble after pushing up the S401
of LC-084 flexible board upwards.
If it assembles then, the tip of S401
will break.
4 Tapping screw (M1.7)
6 Tapping screw (M1.7)
2-8